Email UsAdd to Favorite

PDF Download
All Products
SF-1X Oilless Bushing
Oilless Bushing
Model No.: SF-1X
SF-1X is wall wrapped bearing made of triple layer composites material which consists of a steel backing, a sintered porous bronze particles interlayer and calendared with PTFE and Pb mixture as surface layer. It is of low friction cofeeicient, anti-wear, anti-corrosion and can be used without oil, or only a trace of oil os needed.moreover, it is of low cost, low vibration and low noise, compact and light, SF-1X is widely applied in various sliding articles of different kind of machines, such as textile machines, tobacoo machines, hydraulic vechicles, antomobiles, agriculture and forests machinese and soon.
Read more
HJB01T Gear Pump Bushing
Gear Pump Bushing
Model No.: HJB01T
HJB01T is composed of a specially designed surface layer of PTFE formulations and is specifically applied for the high PV bushes of gear oil pumps. It is to be used in hydrodynamic or boundary lubricating condition of medium or high pressure gear oil pumps such as P=16-25 Mpa, V=3.5-5m/s, it shows the benefit of low friction coefficient, wear resistant and anti-impact properties. At hydrodynamic lubrication. The PV limit reaches to 120N/mm2·m/s. It is a best choice for the bushes of various kinds of gear pumps as well as plunger pumps, vane pumps and so on.
Read more
HJB01W Lead-Free Bushing
Lead-Free Bushing
Model No.: HJB01W
HJB01W is a new type bushing without lead composition which is developed aiming at increasing demands on environmental protection. Besides its wide application on general machines, HJB01W is particularly suitable for food machine, Pharmaceutical machine, tobacco, machine etc.
Read more
HJB01B Bronze-Based Bushing
Bronze-Based Bushing
Model No.: HJB01B
HJB01B is of high safety factory, and is particularly appropriate for high temperature environment where no oil is effcient and where the machine must be under successive long period working condition. This is widely used in steel metallurgy industry such as bushes for roller grooves of successive casting machines, cement grouting pumps and screw convery ers for cement. It can also be composed in steel housing or fabricated into flanged bushes which can move both in radial and in axial directions. It can be applied in bridge bearing plate because of thicker inner surface layer to arrive 130N/mm2.
Read more
HJB01P Reciprocating Motion Bushing
Reciprocating Motion Bushing
Model No.: HJB01P
HJB01P is particularly suitable for bushes in reciprocating motion, and the properties are similar to that of the foreign product designated as DD2. It is wear resistant, and so can keep the lubricating oil clear after long period of working. Meanwhile it can protect the mating surface from wearing. It is used widely as oil damping vibrating absorber of automobiles, motorcycles and various hydraulic cylinders, hydraulic motors and pneumatic elements.
Read more
HJB01S Stainless Steel Bushing
Stainless Steel Bushing
Model No.: HJB01S
HJB01S is of oil resistant, acid resistant,alkaliresistant and seawater resistant, more over, there is no lead in the PTFE surface layer and so is particularly fit for bushings in food stuff machines, alkali flow meters, pumps motion elements in pharmaceutical machines, printing machines chemical engineering machines and other ocean industry. This is a triple layers composites bush, the base material being a bronze plate and a film of heat resistant power filled PTFE being calendered onto the sintered spherical bronze interlayer.
Read more
HJB01D Hydraulic Bushing
Hydraulic Bushing
Model No.: HJB01D
HJB01D Hydraulic bushing is developed on the basis of HJB01P and meanwhile considering the motion way of oil pump and damper. It is the substitute of and parallels in performance with abroad DP4. In addition to covering the same usage of HJB01P, HJB01D in particular fits frequently reciprocating motion with a high side force. It is a tendency to gradually replace HJB01P with HJB01D, the latter will cocer a wide application in auto mobile, motor damper and oilpumps, etc.
Read more
Bimetal Bushing
Model No.: HJB031
HJB031 bimetal bushing is based on steel and sintered with CuPb10Sn10 as a lining layer. This type has the best performance within the range of Cu-Pb alloy constructured bushing.Thereforce it has a wide application and is mostly suitable for where is middle speed and high impact etc.
Read more
Bimetal Bushing
Model No.: HJB032
HJB032 is a bimetal bushing with steel as backing and sintered CuPb24Sn4 as lining layer. This type has fairly good performance in anti-fatigue and load capacity. It is suitable for middle speedand middle load. When overplated certain soft alloy, it can be applied in high-speed internal combustion engine and as connectrod bushing.
Read more
Bimetal Bushing
Model No.: HJB033
HJB033 is a bimetal bushing with steel as backing and sintered CuPb30 as lining layer. It has good performance in anti-seizing, alien substance contamination. It is necessary to be overplated certain soft alloy and mostly applied in internal combustion engine underhigh speed and middle to low load, e.g. main bushing and connect-rod bushing.
Read more
32 Records [1] [2] [3] [4]    [Next]
What We Focus on
CHANNOV are one expert designer, manufacturer and exporter of sliding bearings and bushings under our own registered brand HIB. We concentrate on researching, designing and producing premium quality sliding bearings and bushings since 1998.
Contact Us

Translate Page To English English Translate Page To German Deutsch Tranlate Page To Spanish Español Translate Page To French Français Translate Page To Italian Italiano Translate Page To Portuguese Português Translate Page To Japanese 日本語 Translate Page To Korean 한국의 Translate Page To Dutch Nederlands Translate Page To Russian Русский
Add:No.599 Dongda Rd,QiXing Industrial Zone,Nanhu Dist,JiaXing City,ZheJiang PR,CHINA  Phone:+86-573-82678097
Copyright © 2008~2011 ZHEJIANG CHANNOV AUTO PARTS CO.,LTD All rights reserved. Supported by elut.cn